http://talibtechnology.blogspot.com/
Laptops run on TV
Due to the large number of inquiries about how to view and connect your computer to the TV screen (Plasma, LCD, LED), will be through this thread to explain the most important steps for the appropriate settings
Connections easier than it looks in the long explanations within this subject I tried as much as possible for all the ways to address and details of the sound and the picture is linked to computers silkscreen process
Connect the computer with a home theater system and computer settings screen and plasma screen method.
Explanation will be using the HDMI cable to connect all devices in order to be VoIP
The first step :
We installed a HDMI cord of the computer (graphics card) and then plugged into the outlets of HDMI IN the receiver audio (AV \ R) and then we deliver another wire through the HDMI Out existing Brsvr audio (AV \ R) to the TV screen here we have completed the delivery of all the wires of HDMI now has to be that we connect the computer screen if the user device is a desktop, not a laptop to be through the computer screen work settings crisis Theater (use link the VGA or DVI to connect the PC computer screen), the computer screen will work without problems, provided when selecting a VGA port, for example, we must activate this port through a list of the menu screen.
The second step :
We run Receivers your home theater (AV \ R) and also we run the computer and the screen with a large display, now your computer is running and the image appears on the computer screen, we ensure that the computer may identify the receiver theater (AV \ R) through the following steps:
Pressing a button (start) located in the Windows angle down and choose (Devices and Printers) and then make sure that the device the (AV \ R) has been identified - after adding the device the (AV \ R) computer we Baltala- push right-on image receiver audio (AV \ R) right mouse and choose (Display Setting).
You will show us the following list:
Here we see the presence of two screens and one for the computer and the other for the plasma screen, but since the computer is linked to Brsvr sound (Denon) will show us the receiver name instead of the name of the screen as seen pictures determine Rzelyoshn screen depends on the screen itself if the Full HD determine the highest value appears to us as we watch 1080p * 1920p
The third step :
We are now trying to prepare graphics card to fit the screens Almertbttin computer. Go to the desktop on Windows and push the right of the right mouse and choose graphics card screen will show us through this list we are doing the correct settings we choose the display and here we selected (Denon) as we can see by clicking on the icon 1
We select the type of wire and as I have already mentioned that we are using HDMI and must be careful to HDMI Audio Enable choice to be sound with the image transfer at the same time
We change the value of (Refresh Rate) as seen I chose (30Hz) probably Giri photo does not show him in this value here has to be to call your attention when the image does not display on a plasma screen has to be that we do experience all values here often be caused by lack of PC display content on the screen that we did not choose the correct value of the offer.
We choose Rzelyoshn screen and as I have already mentioned that we must choose Alrzelyoshn commensurate with the screen
Finally, do not forget to click on the Apply button
Here the computer screen settings as seen
We see that the screen has been linked by the VGA port and recognized by the computer with ease
The value of the (Refresh Rate) as we see them 60Hz
I have a computer screen operates at the highest Rzelyoshn available where voice activation settings after the completion of the picture settings above will now turn to
Voice activation in the case of using the wire HDMI settings
Handset by clicking on the icon in the Windows bar at the bottom near the clock as seen
Here to make sure that the stage or screen device has already been identified on the computer right-Alaymen pressing the icon handset and choose from the menu (Playback Devices).
We will find in the next menu theater device (Denon) within the sound associated with the computer equipment we select Icon theater device (Denon) and then pull the right mouse button and choose from the menu (Test). Process test headsets and voice our system
We identify Icon theater device (Denon) and choose the button (Set Default) If your computer is intended only for the theater does not have a headset for use here will be have put the (Denon) as the default device for sound show
We would like the alarm in the event that the settings of the (Denon) above can not change them if necessary to activate the device the following image by clicking on the icon (Denon) and then choose from the menu (Enable).
Activating the VGA port on the computer screen Samsung P2370HD
Pressing the Menu button the Find menu from which we chose to activate the ports
Here we find that the computer screen of the Samsung VGA option is the same as the PC
Activating the HDMI port on the plasma screen Panasonic VT30
Here we also activate the HDMI ports in the plasma screen
There are 8 ports last screen is a PC, it is known as VGA
Here we use the screen of the HDMI ports as seen port number (1) is linked to a home theater system and a port number (2) is linked Brsvr shower due to the lack of my need for the use of the theater with a shower, it must determine the port you want to activate In our case we want Tfied port No. 1 PC display tied theater system
Very important is often some Brotherhood prepares the Options screen to work Brzelyoshn 1080p and this may cause the appearance of the image sometimes so I always recommend that you choose the setting of Auto for all devices to avoid problems - some people do not have home theater possible to connect the computer directly with screen through any port of the existing ports, then connect the audio when using the VGA cable to connect the computer plasma-scree
Posts
No comments:
Post a Comment